"> How To Apply Beard Dye  – Milkman Grooming Co
man holding beard dye kit

How To Apply Beard Dye 

For blokes noticing any grey patches peeking through their facial hair, it may be worth learning how to apply beard dye. After all, this simple lesson can rejuvenate the colour and provide your beard with a much more youthful appearance - what’s not to love?

The process itself can seem daunting at first glance - though with a few tips by your side, dying your beard quickly becomes a breeze. 

If you’re eager to learn how to apply beard dye, you’ve come to the right place. In this blog post, we’ve listed the key steps for dying your beard properly - take a look! 

What Is Beard Dye?

Let’s start off with the basics - what is beard dye?

Similar to hair dye, beard dye is a hair-colouring product that guys use to darken facial hair or hide any grey patches. The process is as simple as brushing the colour through the beard and letting it sit for about 10-minutes or so - followed by a deep rinse. 

How To Apply Beard Dye 

Now that we’ve covered the basics, let’s get into the good stuff - learn how to apply beard dye with these 7 simple steps below. 

Pick The Right Colour 

The first step for dying a beard is to pick the right colour - sounds simple enough, right?

Though for a lot of guys, picking the right colour or shade for your whiskers can be a challenge. Don’t worry, there are a few easy tricks you can use to make the process a bit easier. 

First and foremost, you don’t necessarily need to match your beard and hair colour - most of the time, these two colours will vary in shades. Instead, steer towards a colour that’s subtle and matches the colour of your beard - especially if you’re just fixing up a few grey patches. 

Next, you’ll want to focus on picking a subtle shade. Choosing an excessively dark colour will look unnatural and will stand out like a sore thumb. Instead, pick a colour that’s close to the medium shade of your hair colour. After all, it’s easier to go progressively darker than it is to lighten it back up. 

Do A Patch-Test

Before you start using the beard dye on your face, it’s worth taking the time to do a quick patch test on an unnoticeable area of your skin. 

Some beard dyes can be irritating for the skin, and can even trigger allergic reactions. Try rubbing a drop of the formula on your wrist or arm and leave it overnight. If your skin doesn’t react harshly, you’re good to go. 

Wash Your Whiskers 

For the best results with a beard dye, it’s better to start the process with a clean canvas - this is where a beard wash comes in handy.

Beard washes work to cleanse any dirt or leftover food from your whiskers, without stripping away the natural oils - leaving behind a clean beard with a softer touch.

Make sure you’ve properly rinsed the wash from your beard so it doesn’t interfere with the dye.

Read The Instructions

This point sounds a bit obvious, but a lot of us are guilty of skipping the instructions when we’re excited. 

Rather than jumping in blindly or figuring it out as you go, it’s worth taking a quick moment to read the instructions on your specific beard dye product - especially since each product is different. 

With this information by your side, you’ll know how to properly mix the dye, what tools you’ll need, and how long to leave in the blend in your facial hair. 

Prepare The Skin 

When it comes to dying a beard, a lot of guys find skin-staining to be an issue - luckily, it can be fixed with products like petroleum jelly. They work to prevent any staining on the skin, while also helping to soothe any dryness. 

All you need to do is apply petroleum jelly around your beard lines to create a thick protective layer. Avoid getting any of this product into your beard before using the dye. 

Apply The Beard Dye

Now it’s time for the fun part - dying your facial hair! Remember, the instructions will vary between specific products, but these steps below should provide a good outline of what to expect. 

Start by throwing on a set of rubber gloves - this will stop the dye from staining your hands. Then, mix the colourful base and developer until combined. 

Grab the application brush in your kit, dip the tip of it into the dye, and start brushing your beard in up and down motions - this will help to properly coat the hairs.

Rinse Thoroughly

Once you’ve covered your beard with the dye, let the solution sit for about 10 minutes or until you’ve achieved your desired colour. Follow this with a deep rinse to give your beard a much more natural appearance.

Rinse the dye from your beard until the water starts to run clear. 

How To Maintain Your Beard Colour 

Dying your beard properly is only half the battle. For the best results, you’re going to need a few insider tips to help you care for your freshly dyed beard and keep it looking great.

Give It A Wash 

Is your beard looking a little too dark? One of the best ways to lighten the hairs is to jump in the shower and give it a scrub with your beard wash.

Just be careful not to wash away too much colour. 

If you’re hunting for a beard wash, check out this 2-in-1 Beard Shampoo & Conditioner. Not only does this wash provide your whiskers with a softer touch, but it’ll also work to make your beard look fuller and more manageable. 

Use A Beard Oil

Beard oil is one of those products that every beards-men should have - and for good reason. It moisturises the skin, softens the hair, and provides the beard with a welcoming scent. Though on top of this, it may also help to effectively lock in beard dye to help improve its lifespan. 

Try this deluxe Beard Oil by Milkman - it has one of the most complex, well-balanced formulas available. The blend contains botanical oils, aloe vera extract, and antioxidants to soothe, soften, and strengthen your beard. 

Maintain The Colour 

Since beard dye typically only lasts about 2-weeks, you’re likely going to need to touch up any grey patches from time to time. This will help to keep the colour looking consistent and fresh. 

How regularly you touch-up your beard colour will depend on how quickly the facial hair grows - though every 3-weeks is a good starting point. From here, you’ll be able to gauge how regularly you should be dying your beard. 

For blokes noticing any grey patches peeking through their facial hair, it may be worth learning how to apply beard dye. After all, this simple lesson can rejuvenate the colour and provide your beard with a much more youthful appearance - what’s not to love?

The process itself can seem daunting at first glance - though with a few tips by your side, dying your beard quickly becomes a breeze. 

If you’re eager to learn how to apply beard dye, you’ve come to the right place. In this blog post, we’ve listed the key steps for dying your beard properly - take a look! 

What Is Beard Dye?

Let’s start off with the basics - what is beard dye?

Similar to hair dye, beard dye is a hair-colouring product that guys use to darken facial hair or hide any grey patches. The process is as simple as brushing the colour through the beard and letting it sit for about 10-minutes or so - followed by a deep rinse. 

How To Apply Beard Dye 

Now that we’ve covered the basics, let’s get into the good stuff - learn how to apply beard dye with these 7 simple steps below. 

Pick The Right Colour 

The first step for dying a beard is to pick the right colour - sounds simple enough, right?

Though for a lot of guys, picking the right colour or shade for your whiskers can be a challenge. Don’t worry, there are a few easy tricks you can use to make the process a bit easier. 

First and foremost, you don’t necessarily need to match your beard and hair colour - most of the time, these two colours will vary in shades. Instead, steer towards a colour that’s subtle and matches the colour of your beard - especially if you’re just fixing up a few grey patches. 

Next, you’ll want to focus on picking a subtle shade. Choosing an excessively dark colour will look unnatural and will stand out like a sore thumb. Instead, pick a colour that’s close to the medium shade of your hair colour. After all, it’s easier to go progressively darker than it is to lighten it back up. 

Do A Patch-Test

Before you start using the beard dye on your face, it’s worth taking the time to do a quick patch test on an unnoticeable area of your skin. 

Some beard dyes can be irritating for the skin, and can even trigger allergic reactions. Try rubbing a drop of the formula on your wrist or arm and leave it overnight. If your skin doesn’t react harshly, you’re good to go. 

Wash Your Whiskers 

For the best results with a beard dye, it’s better to start the process with a clean canvas - this is where a beard wash comes in handy.

Beard washes work to cleanse any dirt or leftover food from your whiskers, without stripping away the natural oils - leaving behind a clean beard with a softer touch.

Make sure you’ve properly rinsed the wash from your beard so it doesn’t interfere with the dye.

Read The Instructions

This point sounds a bit obvious, but a lot of us are guilty of skipping the instructions when we’re excited. 

Rather than jumping in blindly or figuring it out as you go, it’s worth taking a quick moment to read the instructions on your specific beard dye product - especially since each product is different. 

With this information by your side, you’ll know how to properly mix the dye, what tools you’ll need, and how long to leave in the blend in your facial hair. 

Prepare The Skin 

When it comes to dying a beard, a lot of guys find skin-staining to be an issue - luckily, it can be fixed with products like petroleum jelly. They work to prevent any staining on the skin, while also helping to soothe any dryness. 

All you need to do is apply petroleum jelly around your beard lines to create a thick protective layer. Avoid getting any of this product into your beard before using the dye. 

Apply The Beard Dye

Now it’s time for the fun part - dying your facial hair! Remember, the instructions will vary between specific products, but these steps below should provide a good outline of what to expect. 

Start by throwing on a set of rubber gloves - this will stop the dye from staining your hands. Then, mix the colourful base and developer until combined. 

Grab the application brush in your kit, dip the tip of it into the dye, and start brushing your beard in up and down motions - this will help to properly coat the hairs.

Rinse Thoroughly

Once you’ve covered your beard with the dye, let the solution sit for about 10 minutes or until you’ve achieved your desired colour. Follow this with a deep rinse to give your beard a much more natural appearance.

Rinse the dye from your beard until the water starts to run clear. 

How To Maintain Your Beard Colour 

Dying your beard properly is only half the battle. For the best results, you’re going to need a few insider tips to help you care for your freshly dyed beard and keep it looking great.

Give It A Wash 

Is your beard looking a little too dark? One of the best ways to lighten the hairs is to jump in the shower and give it a scrub with your beard wash.

Just be careful not to wash away too much colour. 

If you’re hunting for a beard wash, check out this 2-in-1 Beard Shampoo & Conditioner. Not only does this wash provide your whiskers with a softer touch, but it’ll also work to make your beard look fuller and more manageable. 

Use A Beard Oil

Beard oil is one of those products that every beards-men should have - and for good reason. It moisturises the skin, softens the hair, and provides the beard with a welcoming scent. Though on top of this, it may also help to effectively lock in beard dye to help improve its lifespan. 

Try this deluxe Beard Oil by Milkman - it has one of the most complex, well-balanced formulas available. The blend contains botanical oils, aloe vera extract, and antioxidants to soothe, soften, and strengthen your beard. 

Maintain The Colour 

Since beard dye typically only lasts about 2-weeks, you’re likely going to need to touch up any grey patches from time to time. This will help to keep the colour looking consistent and fresh. 

How regularly you touch-up your beard colour will depend on how quickly the facial hair grows - though every 3-weeks is a good starting point. From here, you’ll be able to gauge how regularly you should be dying your beard. 

Related articles
Leave a comment

Please note, comments must be approved before they are published